CHROMiX

Spectrophotometer Calibration and Tolerances

General Color & Graphics Printer Calibration & Profiling
#1

I have a situation in which I own four high quality spectrophotometers.

Recently, I used each device to measure a particular paper-white.

Predictably, I received four different measurement results.

The deltaE between any two devices ranged from .47 to 1.73.

Unfortunately, I have no idea which of the four results is closest to the truth, and I do not know what the maximum difference between device results is reasonable.

Obviously, .47 is acceptable. And, we know from Steve’s last ColorNews article, that a deltaE < 1.0 could also be considered acceptable.

So, perhaps a deltaE => 1.0 should be considered suspect?

Finally, can anyone recommend a test kit containing calibrated materials that I can use to periodically check the accuracy of my spectrophotometers?

Thanks.

variation in measurements using different spectrophotometer
#2

I was recently told about an internet newsgroup that is worth checking out:

sci.engr.color

#3

Computer Integrated Color provides color calibration tiles certified to NIST standards.

colormanagement.com/store/CID35/PID467

#4

Thank you, Michael, for your response to my post.

Since my post, I discovered and purchased a similar product from a domestic supplier.

Please read more about the Colour Standards I purchased:

ceram.com/colours/colours.htm

#5

At 4:34 AM -0800 3/24/05, christ0pher wrote:

Thank you, Michael, for your response to my post.

Since my post, I discovered and purchased a similar product from a domestic supplier.

Please read more about the Colour Standards I purchased:

http://www.ceram.com/colours/colours.htm

this sounds interesting…

when you’ve had some time to use them can you report back? I curious how you have chosen to use them and what you’ve found…

thanks!

Regards,

Steve

o Steve Upton CHROMiX www.chromix.com
o (hueman) 866.CHROMiX

–

Post generated from email list

#6

Hi,

I’m experiencing the same problem… My Techkon SpectroDens produces results that are quite different from my EyeOne. When measuring a MediaWedge with the Techkon I get results that are different and even contradictory to my EyeOne. And not only the paperwhite, but also the mean dE, the primary colors and graybalance…

I’m aware that no measurement device is the same, but I was unpleasantly surprised when I discovered that my < 1 deltaE proofs were actually 1.8 deltaE according to my Techkon.

see [url]http://one.imports.literateforums.com/t/variation-in-measurements-using-different-spectrophotometer/648/1]